Note: Even though you can view this Getting Started page just fine on a phone or tablet, the user interface of the Revolver Ad Project itself works best on the comfort of a larger screen like a laptop or desktop computer. Delivery of ads on mobile devices works perfectly fine, by the way.

A new account

After you first log in to a brand new Revolver Ad Project account, you will be greeted by what might seem like a somewhat intimidating empty screen. Unlike a word processor, where you can just start typing, things are a little bit different when you begin using Revolver Ad Project. Don’t worry, you’ll be creating a few items and will have your first ad displaying in no time!

Getting Started with the Revolver Ad Project

Open an account

Sign Up

Defining a Website

In the Revolver Ad Project, you can define one, or two, or as many websites as you want.

When you first log in, you will be in the Inventory tab. If you’ve moved around a bit to see what else is available, return to the Inventory tab now.

Click the Websites link in the left-hand menu, and then click the Add new website link in the middle region of the screen.

Getting Started with the Revolver Ad Project

 

Enter the details for the new website. Here are a few helpful notes:

  • Entering the URL, while mandatory, does not imply that the site is going to be checked. You can use the invocation code you create later on in this tutorial on any website.
  • Make sure to enter a good website name, as this will be visible later in the lists of websites and in the statistics. Keep it short but descriptive.
  • You must enter a contact name and e-mail address, but these are not actually going to be used for any functionality.
  • After you’ve entered everything, click the Save changes button.
Getting Started with the Revolver Ad Project

 

When the new site is saved, it will show up in the list (a very short list at first), and there will also be a message with a green highlight to inform you about the new site and provide a link that enables you to add a new Zone for the site. That’s the next step.

Getting Started with the Revolver Ad Project

 

Learn more about Websites:

Revolver Ad Project Documentation

Defining a Zone

In the Revolver Ad Project, a Zone is the representation of a place where an advertisement can appear on a webpage, or in a template that defines an entire set of webpages for a site.

If you’ve just added your first Website (see above) then you can now click the Add a zone link in the green notification. If you’ve returned to this tutorial later, and the green notification is no longer visible, you can also click the Add new zone link on the right-hand side of the list of sites.

Getting Started with the Revolver Ad Project

 

Enter the details for the new zone. Here are a few recommendations:

  • For the Name, enter something that’s short but still descriptive. This name will appear in the list of zones, and also in the statistics. A good name will make it easier to recognize later.
  • The Description is not mandatory but can be very useful when you have a longer list of zones for one website.
  • In this tutorial, select Banner, button, or rectangle for the Zone type.
  • Select one of the pre-defined Size options, in this tutorial it is assumed you will use the IAB Leaderboard (728 x 90).
  • Once you have entered all the settings, click the Save changes button.

Your new zone will be saved, and it will show up in the list of zones. From here, you could continue to create more zones, but for this tutorial, we need just one zone. You will return to this page at the end of this tutorial to grab the zone’s Invocation code.

Getting Started with the Revolver Ad Project

 

Getting Started with the Revolver Ad Project

 

Learn more about Zones:

Revolver Ad Project Documentation

Creating an Advertiser

The point of using an ad server is to be able to display the advertisements for your advertisers. Let’s create the first advertiser. While you’re still in the Inventory tab, click the Advertisers link in the left-hand menu, and then click the Add new advertiser link.

Getting Started with the Revolver Ad Project

 

This will bring up a new screen where you can enter the details of the advertiser. Here are a few recommendations:

  • For the Name, enter something that’s short but still descriptive. This name will appear in the list of Advertisers, and also in the statistics.
  • For the Contact and their E-mail, you could enter the advertiser’s details. Be aware, though, that if you enable either of the two checkboxes below, Revive Adserver may start sending e-mails to that e-mail address. Discuss with your customer first if they want to receive those e-mails.
    As an alternative, you could enter the name and e-mail address of the salesperson in your own organization who is responsible for this advertiser.
  • All other fields and settings on this form are optional, for this tutorial, just use the defaults.

Clicking the Save Changes button will store the new advertiser in the database. You will return to the list of Advertisers, and a notification in green informs you that the new advertiser has been created.

You can use the link in the notification to Add a campaign, which will be the next step.

Getting Started with the Revolver Ad Project

 

Getting Started with the Revolver Ad Project

 

Learn more about Advertisers:

Revolver Ad Project Documentation

Create a Campaign

In the Revolver Ad Project, a Campaign represents the agreement between you and an advertiser to show their ads, and it contains the details of that agreement. It’s about things like start date, end date, how often the ads are to be displayed, and so on.

If you’ve just added your first Advertiser (see above) then you can now click the Add a campaign link in the green notification. If you’ve returned to this tutorial later, and the green notification is no longer visible, you can also click the Add new campaign link on the right-hand side of the list of advertisers.

Getting Started with the Revolver Ad Project

This will bring up a new screen where you can enter the details of the new campaign. Here are a few recommendations:

  • For the Name, enter something short but still descriptive. Do not leave the suggested “default campaign” as the name, if all your campaigns would be called that same name, it will be impossible to distinguish between them. It might be smart to follow a pattern like “Advertiser name – Campaign Name”.
  • For this tutorial, select the type as Remnant. As soon as you make that selection, the rest of the form appears with the relevant fields for a Remnant campaign visible.

Now enter the rest of the details for the campaign, using the defaults presented automatically.

Getting Started with the Revolver Ad Project

The remnant campaign for this tutorial will start immediately, and it has no end date. No pricing information is needed, and since it is the only campaign, for the time being, the campaign weight relative to other campaigns can be left at ‘1’. Do not enter or change anything for the delivery capping either, and don’t select any of the checkboxes.

You will notice that despite the somewhat intimidating form, making a remnant campaign is very simple. Just enter the name, select type Remnant, then scroll down to the end and click Save Changes.

Getting Started with the Revolver Ad Project

The system will store the new campaign in the database. You will return to the list of Campaigns for the advertiser you’re working on, and a notification in green informs you that the new campaign has been created.

You can use the link in the notification to Add a banner, which will be the next step.

Getting Started with the Revolver Ad Project

Learn more about Campaigns:

Revolver Ad Project Documentation

Create a Banner

If you’ve just added your first Campaign (see above) then you can now click the Add a banner link in the green notification. If you’ve returned to this tutorial later, and the green notification is no longer visible, you can also click the Add new banner link on the right-hand side of the list of campaigns.

Getting Started with the Revolver Ad Project

This will bring up a new screen where you can enter the details of the new banner and upload the banner image. Here are a few recommendations:

  • For this tutorial, leave the Type of banner as the default, which is to upload an image file.
  • For the Name, enter something short but still descriptive. It might be smart to follow a pattern like “Campaign name – Banner Name” where the banner name could represent the description of the various sizes of banners in your campaign.
  • Click the Choose File button to select a banner that’s stored somewhere on your disk or on the network. Once you’ve selected it, the name of the file will appear to the right of the button.
Getting Started with the Revolver Ad Project

 

If you don’t have a banner image available, please use the button to download an example file so you can use that for the tutorial.

Sample Banner, click to:

Download

  • Enter the Destination URL, which is the address someone will go to when they click the banner after seeing it on a website. In other systems, this may be referred to as the Landing page. It is not mandatory to enter a URL, but banners that can’t be clicked are very rare.
  • Leave the field Target empty, which means that when the banner is clicked, the destination URL is opened in a new browser window or tab.
  • Optionally, you can enter the Alt text that will be displayed when someone hovers the banner with their mouse, or by screen readers that are used by people with poor sight.
  • Leave all the other fields at their default values and click the Save Changes button.

The new banner will now be saved in the database, and the banner image will be uploaded to the server at the same time. A notification in green informs you that the new banner was saved. There is also a preview of the banner, so you can quickly identify each one when you’ve created multiple banners in the same campaign.

There are just two steps left now: link your campaign to the zone you created earlier and then grab that zone’s invocation code which will go on your website. Let’s start with linking the campaign to the zone.

Getting Started with the Revolver Ad Project

 

Getting Started with the Revolver Ad Project

 

Learn more about Banners:

Revolver Ad Project Documentation

Link Campaign to Zone

By linking the Campaign you created to the zone you created at the start of this tutorial, you’re going to instruct the ad server to consider the banners of the campaign for delivery when a request comes in on that zone.

To go to the screen where you can link the campaign to the zone, click the Campaign’s name in the overview of the banners.

Getting Started with the Revolver Ad Project

 

Next, click the Linked zones tab for the selected campaign.

A screen will present itself that enables you to select the zone (or multiple zones if you have them) that you want your campaign to be linked to.

Getting Started with the Revolver Ad Project

 

On the left half of the screen, there is a list of all the Available zones that exist and haven’t been linked yet.

Using the mouse, click the check box in front of the zone’s name. Immediately, the Link button in the middle will be enabled.

Getting Started with the Revolver Ad Project

Click the Link button and notice that the zone you selected moves to the right half of the screen, under Linked zones, and it is no longer present in the list of Available zones.

You do not have to save anything here, linking and unlinking takes effect automatically.

All that remains now is to grab the zone’s invocation code and put it on your website. That’s the next and final step of this tutorial.

Getting Started with the Revolver Ad Project

 

Learn more about Linking Campaigns:

Revolver Ad Project Documentation

Generate zone invocation code

The Invocation code for a zone is a small piece of javascript code that can be placed on a web page. Every time the page is opened in a browser, that piece of code is also sent to the browser. The browser executes it and in the process, it sends a call to the ad server to return an ad. This process is called invoking the ad server, and that’s why the code is called invocation code.

To retrieve the invocation code that is associated with a zone, first, navigate to the overview of zones for the website you defined earlier. The easiest way to get there is to first click the Websites link in the left-hand menu, and then click the Zones link for the website you’re working on.

In this tutorial, there is only one website, so the zones link should be easy enough to find.

Getting Started with the Revolver Ad Project

 

Getting Started with the Revolver Ad Project

 

Next, on the right-hand side of the zone you created earlier, click the Invocation code link.

Getting Started with the Revolver Ad Project

 

This will open a page where the zone’s invocation code is displayed, ready to copy, and then paste into your website.

Just click anywhere inside the big box where the code is displayed, and then use your computer’s copy key combination (Ctrl-C in Windows) to put it on the clipboard.

Next, go to your website, and using whatever way it has to enter javascript code into the pages, use your computer’s paste key combination (Ctrl-V in Windows) to put it into the site. Consult your website documentation or check with the vendor to find out how to do this.

Getting Started with the Revolver Ad Project